Popular Articles
ES Replacement System Install Guide
Introduction This guide will walk you through the complete installation process. If you have any questions, please contact us. DO NOT force anything. Required Tools 9v battery for the preamp Drill Black permanent marker Pencil Ruler Flashlight ...
ES Replacement System F.A.Q.
What Taylor guitars will it work with? ES1.1: 2003-2006, AA Battery Box Yes, with our AA Adapter kit. Because of the age of the guitar and variations in Taylor's manufacturing, the Saddle-Pickup may need adjustment for a correct setup. You can ...
Polydrive Replacement System Install Guide
Introduction This guide will walk you through the complete installation process. If you have any questions, please contact us. System Compatibility & Installation Note Godin Multiac guitars come equipped with either the older RMC Polydrive system or ...
Sound Hole Mount System Install Guide
Introduction This guide will walk you through the complete installation process. If you have any questions, please contact us. DO NOT force anything. Required Tools Drill 1/4” (6.35mm) dowel rod Sanding materials and shaping tools (belt sander ...
Sound Hole Mount System Maintenance
Introduction The Sound Hole Mount System requires very little maintenance. However, if you do need to make adjustments to the system, this page will give you step-by-step instructions to do so. Replacing the Battery The system has a battery life of ...
Recent Articles
PreSonic Install Guide
Introduction Welcome to the PreSonic installation Guide. This guide is specifically designed for a seamless upgrade, assuming your guitar is currently equipped with a standard Fishman™ side-mounted preamp system. Because the necessary side cutout and ...
Polydrive Replacement System F.A.Q.
How hard is the system to install? This is an intermediate-level installation. It requires soldering, wire stripping, and the ability to carefully follow instructions. If you are comfortable soldering small wires and using basic hand tools, you will ...
PreSonic F.A.Q.
How hard is the system to install? Does the system come with everything needed for a retrofit or a new installation? Will this system work with MIDI? What Fishman systems does this replace?
ES Replacement System F.A.Q.
What Taylor guitars will it work with? ES1.1: 2003-2006, AA Battery Box Yes, with our AA Adapter kit. Because of the age of the guitar and variations in Taylor's manufacturing, the Saddle-Pickup may need adjustment for a correct setup. You can ...
Sound Hole Mount System Troubleshooting
No Output If your pickup system has no output of any kind, follow these steps: Cause Solution The system master volume is turned down. Turn the volume all the way up The preamp is not turned on. Make sure you are using a mono (Tip-Sleeve) guitar ...